killed 50 from two blocks away from the 32nd floor....

USFREEDOM911 said:
That would depend on the conversation; because even past Presidents are referred to in such a manner.

Or didn't you know that?
Click to expand...

lol

From now on, I'll expect you to have a poster clarify which President they are referring to so that you don't think it is James Garfield.
 
domer76 said:
lol

From now on, I'll expect you to have a poster clarify which President they are referring to so that you don't think it is James Garfield.
Click to expand...

Why would that be necessary; because if the discussion was about Garfield, then it would be proper to being a post with the President....................!

Your desperation is showing. :D
 
domer76 said:
We've been down this road before, ignoramus.

THERE IS NO SUCH THING AS AN INALIENABLE RIGHT.

You keep making the claim, yet cannot identify a single one.

Ask me again if driving a car is a right. I'm still laughing about the stupidity of the question.
Click to expand...

did you not say society cannot survive without vehicles????????? a simple yes or no, moron.
 
USFREEDOM911 said:
Here's an example of what someone can do, with home equipment.

Click to expand...

Like Damo said, that’s “very much not easy,” but it’s oh so cool. I love machine shops. My good friend’s dad worked at one when we were kids. We made an offset circular part that made the water pump work for an old Montgomery Wards boat motor. My wife’s uncle and cousins own and operate one in KY now. I love going by there tinkering with their machinery. It’s the combination of the Math geek in me along with my fondness for building stuff. Thanks for sharing.
 
domer76 said:
Is driving a vehicle a right? Stupid question of the day!

Re: that driving. Is that without the title and registration for the person you sold the car to? LOL
Click to expand...

so you're refusing to answer a direct question........great show of conviction for your beliefs. and why should we believe you about no inalienable rights again????
 
Do you think banning = no access?

Automatic is already banned, yet he had automatic. Looks like banning doesn't always work. See drug war.
 
SmarterthanYou said:
so you're refusing to answer a direct question........great show of conviction for your beliefs. and why should we believe you about no inalienable rights again????
Click to expand...

Is driving a vehicle a right? Get the fuck out of here and quit wasting my time with such drivel.

Find the inalienable part in the Constitution yet? (no)
Carried your popgun into the courthouse yet? (no)
 
leaningright said:
Like Damo said, that’s “very much not easy,” but it’s oh so cool. I love machine shops. My good friend’s dad worked at one when we were kids. We made an offset circular part that made the water pump work for an old Montgomery Wards boat motor. My wife’s uncle and cousins own and operate one in KY now. I love going by there tinkering with their machinery. It’s the combination of the Math geek in me along with my fondness for building stuff. Thanks for sharing.
Click to expand...

With the new programmable machines out there, it's pretty much as simple as loading the program, putting in the blank, and hitting the start button.
 
USFREEDOM911 said:
With the new programmable machines out there, it's pretty much as simple as loading the program, putting in the blank, and hitting the start button.
Click to expand...

It's not quite as easy as that if you're speaking of CNC turning and milling machines. You must select the proper tooling and set the offsets and for each tool change.
I can't speak for 3D printers though, I have never seen one.
 
RB 60 said:
It's not quite as easy as that if you're speaking of CNC turning and milling machines. You must select the proper tooling and set the offsets and for each tool change.
I can't speak for 3D printers though, I have never seen one.
Click to expand...

A little bit of experience, is all that's needed.
Or even some instructions, with a bit of trial and error.
 
RB 60 said:
Trial and error? Have you ever seen a CNC "crash"?
How many CNC's have you set up?
Just asking...
Click to expand...

So you're saying that it's absolutely impossible and there is no way it could be accomplished.

Does that mean that this video is a fake??

MEDIA]
 
That video has nothing to do with setting up the machinery. You claimed all you have to do is load the program and hit a button, I tried to explain it's not as simple as that.
 
SmarterthanYou said:
as USF explained, spot on correctly, that is exactly what the bump stock device is. IMO it's worse than a full auto. It takes an extraordinary amount of practice to get used to and even then, it's less accurate than a full auto.....which isn't accurate anyway.
Click to expand...

This is one of the things bothering me. First report of shots fired is 10:08 and at 10:19 gunfire stopped.

I have never used a bump stock, but I know from personal experience that when I do anything more than three shot bursts with my AR, my accuracy goes to shit

My point being that he was fairly accurate in a short period of time, with a setup that I have to imagine is not very accurate.

So we are supposed to believe that this 64 year old retired accountant amassed this arsenal, set it up, created a kill box, moved from room to without any training or practice?

With all that adrenaline pumping, I have a hard time believing that he had the presence of mind to move to another window. Maybe he didn’t?

I guess he could have gone out in the desert and just fired them off without anyone knowing.

This thing stinks to high heaven.
 
Something else to consider. I am having trouble believing that this 64 year old gambler had the stamina to pull this off.




Sent from my iPad using Tapatalk
 
Toxic Titties said:
This is one of the things bothering me. First report of shots fired is 10:08 and at 10:19 gunfire stopped.

I have never used a bump stock, but I know from personal experience that when I do anything more than three shot bursts with my AR, my accuracy goes to shit

My point being that he was fairly accurate in a short period of time, with a setup that I have to imagine is not very accurate.

So we are supposed to believe that this 64 year old retired accountant amassed this arsenal, set it up, created a kill box, moved from room to without any training or practice?

With all that adrenaline pumping, I have a hard time believing that he had the presence of mind to move to another window. Maybe he didn’t?

I guess he could have gone out in the desert and just fired them off without anyone knowing.

This thing stinks to high heaven.
Click to expand...

Is your AR select fire? If so, I hope you have the proper permit to own it.
That said, nowhere has it been reported how close or far apart the victims were. That crowd numbered in the thousands and was quite large, so even at that distance (300 yd.) it wouldn't be difficult to hit people even with a full auto.
 
You must log in or register to reply here.
Back
Top