Wind Turbine Blades Can’t Be Recycled, So They’re Piling Up in Landfills

anatta

100% recycled karma
6247a7038d845.png

Fragments of wind turbine blades await burial at the Casper Regional Landfill in Wyoming.
https://getpocket.com/explore/item/...ling-up-in-landfills?utm_source=pocket-newtab

A wind turbine’s blades can be longer than a Boeing 747 wing, so at the end of their lifespan they can’t just be hauled away. First, you need to saw through the lissome fiberglass using a diamond-encrusted industrial saw to create three pieces small enough to be strapped to a tractor-trailer.

The municipal landfill in Casper, Wyoming, is the final resting place of 870 blades whose days making renewable energy have come to end. The severed fragments look like bleached whale bones nestled against one another.

“That’s the end of it for this winter,” said waste technician Michael Bratvold [at the time this was written in February 2020], watching a bulldozer bury them forever in sand. “We’ll get the rest when the weather breaks this spring.”

Tens of thousands of aging blades are coming down from steel towers around the world and most have nowhere to go but landfills. In the U.S. alone, about 8,000 will be removed in each of the next four years. Europe, which has been dealing with the problem longer, has about 3,800 coming down annually through at least 2022, according to BloombergNEF. It’s going to get worse: Most were built more than a decade ago, when installations were less than a fifth of what they are now.

Built to withstand hurricane-force winds, the blades can’t easily be crushed, recycled or repurposed. That’s created an urgent search for alternatives in places that lack wide-open prairies. In the U.S., they go to the handful of landfills that accept them, in Lake Mills, Iowa; Sioux Falls, South Dakota; and Casper, where they will be interred in stacks that reach 30 feet under.

“The last thing we want to do is create even more environmental challenges.” green_wind_02 Each blade is cut into pieces for transport and stacked for efficiency. Photographer: Benjamin Rasmussen for Bloomberg Green

To prevent catastrophic climate change caused by burning fossil fuels, many governments and corporations have pledged to use only clean energy by 2050. Wind energy is one of the cheapest ways to reach that goal.

fiberglass blades remain difficult to dispose of. With some as long as a football field, big rigs can only carry one at a time, making transportation costs prohibitive for long-distance hauls. Scientists are trying to find better ways to separate resins from fibers or to give small chunks new life as pellets or boards.
 
6247a7038d845.png

Fragments of wind turbine blades await burial at the Casper Regional Landfill in Wyoming.
https://getpocket.com/explore/item/...ling-up-in-landfills?utm_source=pocket-newtab

A wind turbine’s blades can be longer than a Boeing 747 wing, so at the end of their lifespan they can’t just be hauled away. First, you need to saw through the lissome fiberglass using a diamond-encrusted industrial saw to create three pieces small enough to be strapped to a tractor-trailer.

The municipal landfill in Casper, Wyoming, is the final resting place of 870 blades whose days making renewable energy have come to end. The severed fragments look like bleached whale bones nestled against one another.

“That’s the end of it for this winter,” said waste technician Michael Bratvold [at the time this was written in February 2020], watching a bulldozer bury them forever in sand. “We’ll get the rest when the weather breaks this spring.”

Tens of thousands of aging blades are coming down from steel towers around the world and most have nowhere to go but landfills. In the U.S. alone, about 8,000 will be removed in each of the next four years. Europe, which has been dealing with the problem longer, has about 3,800 coming down annually through at least 2022, according to BloombergNEF. It’s going to get worse: Most were built more than a decade ago, when installations were less than a fifth of what they are now.

Built to withstand hurricane-force winds, the blades can’t easily be crushed, recycled or repurposed. That’s created an urgent search for alternatives in places that lack wide-open prairies. In the U.S., they go to the handful of landfills that accept them, in Lake Mills, Iowa; Sioux Falls, South Dakota; and Casper, where they will be interred in stacks that reach 30 feet under.

“The last thing we want to do is create even more environmental challenges.” green_wind_02 Each blade is cut into pieces for transport and stacked for efficiency. Photographer: Benjamin Rasmussen for Bloomberg Green

To prevent catastrophic climate change caused by burning fossil fuels, many governments and corporations have pledged to use only clean energy by 2050. Wind energy is one of the cheapest ways to reach that goal.

fiberglass blades remain difficult to dispose of. With some as long as a football field, big rigs can only carry one at a time, making transportation costs prohibitive for long-distance hauls. Scientists are trying to find better ways to separate resins from fibers or to give small chunks new life as pellets or boards.

Let's give "green" scientists new lives. :laugh:
 
Technology needs time. A few decades ago, computers took up 2 rooms of a building, and there was no such thing as a "cloud."

more like a couple generations for computers. its kind of surprising that more effort was not put forth on storage when the generation was being developed except that storage IS the hard part of the process. people tend to gravitate to the low hanging fruit.
 
Newer aircraft like the 737 is made of composite material / fiberglass composites

Boeing and Airbus have both increasingly embraced composite structures over the years, particularly with their latest aircraft models. Both the Boeing 787 and the Airbus A350 feature more than 50% of composite materials (by weight) - the largest amount ever used on a commercial aircraft
 
read your damn link
This breakthrough is a crucial step towards Siemens Gamesa’s ambitious goal to make turbines fully recyclable by 2040
~~
Global Fiberglass Solutions is a U.S. start-up that is working to scale up its proprietary wind turbine blade recycling technology,

~~
meaning a start up and a process are there, but they are not being recycled
 
I have heard the claim that the old ones that are being disposed of now cant be recycled, but the ones that have been installed in recent years can be.

I have not verified the claim.
 
I have heard the claim that the old ones that are being disposed of now cant be recycled, but the ones that have been installed in recent years can be.

I have not verified the claim.

there is research. currently no blades can be recycled in a business type manner
Meaning some studies and prototypes are "promising", and there are "goals" but not econmically viable
https://link.springer.com/article/10.1007/s12649-019-00659-0
 
Back
Top